BlackArmor NAS 440/420 Firmware Update For Mac

BlackArmor NAS 440/420 Firmware Update is the most current Firmware Update Code for the Seagate BlackArmor NAS 440 and NAS 420 Servers. BlackArmor NAS 440/420 Firmware Update image should only be applied if you have changed your Firmware Update settings to Manual.

Though BlackArmor NAS 440/420 Firmware Update is a rather simple procedure, it is recommended that you backup any/all important data before proceding.

Open your browser and launch the Seagate BlackArmor Web User Interface (UI). Provide administrative username/password authentication when prompted. The system Status page opens.

Click on the Firmware Update link provided in the left column of the Web UI. The Auto Update page opens. Click on the Manual Update link provided in the left column of the Web UI. The Manual Update page opens.

Click Browse to locate/select the sg4000-4000.0661.img file. Once the file/file path is populated in the field provided, click the Submit button. The update starts automatically. This may take a few minutes to complete.

When finished the BlackArmor NAS 440 or NAS 420 restarts. You will be returned to the Login Page where you can authenticate again to access the Web UI.

NOTE: During the update process, do not refresh or shutdown your browser.