May 15th, 2012· Preferences are now stored in the Application Support folder. If you have run a previous version of MacWise, your settings will be copied from the old preferences location to the new one.
· Fix - If you opened a second window and saved settings with a Command S, the window size would be incorrect the next time you ran MacWise and the connection would change to serial.
May 8th, 2012· Feature - New preference option, “Allow Delete key to continue to line above in Half Duplex Mode”
· Also, Caps Lock On works in half duplex mode now.
April 24th, 2012· Fix - Direct PCL Printing lets you print directly to your Mac printer using PCL commands to set your printer font, size, margins, etc.
February 4th, 2012· Fix - “Unable to open!RECORDERft.txt" error message during data transfers from host to the Mac.
January 18th, 2012· Fix - VT100 / VT220 scrollback fix when top and bottom margins are set.
December 29th, 2011· Fix - Clear screen for VT100 / VT220 when top and bottom margins are set was clearing the whole screen and should only clear the area within the margines.
· Fix - Support ESC c to clear margins
December 6th, 2011· Added 28800 baud to the list of baud rates you can use.
· When you have "Do not wait for echo characters" enabled, Mac-To-Host transfers is much faster now. (Edit Menu / Mac-to-Host Transfer Options...)
· Fix - Split screen scrolling using top and bottom margins for VT100 / VT220
November 29th, 2011· Feature - Display pictures from the Web using host commands.
October 12th, 2011· Fix - Cursor may have been positioned incorrectly if the host sent null characters during absolute addressing escape sequences.
October 12th, 2011· Fix - Cursor may have been positioned incorrectly if the host sent null characters during absolute addressing escape sequences.
September 29th, 2011· Feature - Supports the trackpad and scrollwheel mouse for scrolling.
September 26th, 2011· Feature - Now supports Full Screen mode in Lion.
· To enter Full Screen mode, click on the icon at the top right of the window, or select "Enter Full Screen" from the Window Menu, or use the keyboard (Control-Command F).
· To exit Full Screen mode, click on the icon at the top right of the window, or select "Exit Full Screen" from the Window Menu, or use the keyboard (Control-Command F).
· In Full Screen mode, the menu bar disappears and can be made visible by moving the mouse to the top of the screen.
· You may notice that the escape key is used in many full screen apps to exit full screen mode. However, the escape key is used for many other functions in MacWise and therefore cannot be used to exit full screen mode.
· For more information about full screen apps in Lion, visit Apple's web page
· Note: If you are using a MacBook Air or MacBook Pro with a 1280 X 800 screen, the Full Screen mode is very useful because you can use the 24-point font and large window to fill the entire screen including the function keys at the bottom of the screen. You can use a three-finger swipe (left or right) on your trackpad to switch from the MacWise full screen back to the desktop or to other full screen windows. You can also use Control-Left arrow and Control-Right arrow to switch.
September 8th, 2011· Fix - Alternate keypad mode for VT100 / VT220 emulations.
August 29th, 2011· Fix - Minimized windows could appear to open randomly.
· (Actually caused by minimizing a window in MacWise, then switching to another app and unhiding that app.) Windows now stay minimized as they should.
July 20th, 2011· Installer fix for Macs running OS X prior to Leopard. Fonts will now be installed correctly on those older systems.
June 8th, 2011· Fix - Problems opening new windows after the last window had been closed.
· Fix - Help key on older Mac keyboards should double as an insert key for Viewpoint and Wyse emulation. Sends Esc q to the host.
· Fix - Font problem with IBM Set2.
May 10th, 2011Fix - Picture display problems:
· Pictures can be displayed using the following escape sequence
· ESC STX iL , filename , col , row , width , height , aspect, border CR
· Clicking the mouse on a picture in the MacWise window would hang the app.
· If function keys were hidden, the picture would also be hidden untill you clicked on it.
· Resizing the window would make the picture hide.
· Pictures were being cleared by a normal clear screen command from the host. They should be protected from normal screen clearing commands.
May 6th, 2011· "Escape c" commands are now supported for drawing boxes and erasing text within a box. (for Wyse and Viewpoint emulation)
· Fix - Pasting text to the host was adding a hex 00 to the end of the pasted text, causing problems for PICK editors. (problem introduced with version 12.2.6)
May 2nd, 2011· Fix - Unexecpectedly quit when scrolling more than 40 pages of data.
· (cumulative during a session).
· Versions prior to 12.2.7 did not have this problem.
· Fix - When pasting large amounts of data to the host, data could be shifted over or missing on the screen as it rapidly scrolled by. This did not affect the data that arrived at the host but was distracting to see on screen.
April 21st, 2011· Fix - Displaying Pictures. Picture escape sequence would hang MacWise if not all parameters were in the sequence programmed by the host. Also, spaces after commas would cause no picture display.
March 14th, 2011· Fix - MacWise version 12.2.8 was creating a folder called Application Support/MacWise in the user library.
· It should have been a MacWise folder inside of the Application Support folder.
February 11th, 2011· Fix - ANSI graphic characters for SCO ANSI mode when using the ansi terminal type. Instead of ZDDD and other strange characters you will now get graphic line drawing characters for drawing boxes around text.
· Note: Your settings for International Characters are important. Also, see this support page for help.
January 25th, 2011· Fix - Wyse 60 emulation - Fixed a rare problem caused when the host programs Wyse 60 arrow keys. (Wyse 50 emulation did not have this problem)
· Symptoms: The following preferences are unrelated to arrow keys but could have changed when you quit and ran MacWise after the host sent ESC Z commands to MacWise when programming custom arrow key values.
· Use SLNet Options with Kermit in MacWise Preferences
· Half Duplex / Full Duplex Display mode under the Settings Menu
· iPhone screen (font size and window size)
· FlushOutput Character = Control F in Telnet Settings.
· No Inverse Underline option in Video Attribute Options
· Print Control Chacters in Printer Setup
January 20th, 2011· Added BBEdit to the list of file types you can save captured text as.
· Changed name of “Save Captured Text As...” to “Captured text will be saved as” (Under the Capture Menu".
· Changed outdated TeachText to TextEdit.
· Fix - pasting text could stop before done if large amounts of text lines were being pasted to the host.
January 11th, 2011· Fix - Modem dialer was not working for fast intel Macs. Was not dialing at all due to timing problem.
· Fix - When you hang up a modem connection, it will now turn capture off and clipboard recording off.
January 5th, 2011· Fix - Half duplex mode - problems with textwrap, scrolling and screen refresh and Delete key.
· Now compatible with textphone terminals for the deaf using half duplex.
January 5th, 2011· Coming soon to the iTunes Mac Store. (January 6, 2011)
October 19th, 2010· Feature - Allows you to leave the user name blank in the SSH Secure Shell Connection window.
· When username is blank, you will be prompted for the user name each time you open a new connection.
· (For those who want to log into the same host repeatedly but with different user names)
October 11th, 2010· Fix - Kermit upload timing to get succesful file transfer message from host.
September 22nd, 2010· Fixed "Invalid Path Name" errors when using host programming with ESC~5~F~MacFileName.
· Also, added two new variables to use for MacFileName.
· MacFileName can be a complete path or just a file name. If no path is specified, then the file is saved on the desktop.
· If MacFileName is a path, you can use two handy variables to create your path. These variables allow you to write one host program that works on all Macs regardless of their hard drive name or user name.
· The UserDesktop variable sends the file to the desktop. Or you could use the variable, BootVolume to send the file to the boot drive.
· For Example: MacFileName = "UserDesktop:MyTestFile" or MacFileName = "BootVolume:MyTestFolder:MyTestFile"
· NOTE: See the file called "Special Host to Mac Commands" in the Host Sample Programs folder for a list of all special commands supported by MacWise.
· Added support for ESC [ Pn X for Sco Ansi emulation in VT100 or VT220.
· It erases characters at the cursor position plus Pn characters - 1
August 12th, 2010· Feature - Kermit uploads now supported under host control.
· Look in the MacWise12 folder for the Kermit Help folder to see how to program the host to receive kermit files from MacWise.
· Note: Kermit downloads have been supported since version 10.9.07. Kermit uploads are new in this 12.15 version.
July 26th, 2010· Feature - MacWise now supports direct PCL printing. When PCL commands are included in the print job sent from the host to MacWise, the host can control printer features such as bold text, lines per inch, margins and much more.
· When this option is enabled in Printer Setup under the FIle Menu, the standard Mac Print dialog box is bypassed and the print job is sent directly to the default printer.
July 26th, 2010· Fix - When recording to the clipboard, a carriage return was being added to the last line recorded. Removed the last CR.
July 8th, 2010· Fix - Could not select Transparency from the Window Menu.
· The problem was introduced in the previous version.
July 6th, 2010· Feature - You can how hit the return key to open a connection to the host. This works similar to Option - O except that the return key will only open a new connection if the current connection is closed.
· Feature - When “Connection closed by foreign host.” is received from the host computer, MacWise will now close it's connection to the host.
· Fix - Switching from one connection method to another was not closing the current connection. (For instance, previously if you switched from a serial connection to telnet connection in the same window, the large dot would stay in the title as if the new telnet connection was already open but it was really the serial connection that was still open).
June 18th, 2010· MacWise can now display pictures.
· The pictures can reside on the Mac or a server.
· Windows PC servers are supported for storing pictures also.
· Pictures can be placed anywhere on the screen under host control.
· They can also be sized and scaled to specific dimensions or can retain their original aspect ratio. Accuterm escape sequences are supported for displaying pictures.
· Uploading text files under host control is now also supported.
June 10th, 2010· Fix - "Use ANSI Colors" mode, colors more accurate now.
May 24th, 2010· Fix - If System Builder was enabled, there was a problem when lassoing text to the clipboard.
· If you held the mouse down too long before starting your drag, the coordinates would be sent to the host as if you clicked instead of sending the text to the clipboard.
· Feature - Process URL now strips trailing spaces before launching the browser.
· For instance, the following command from the host would remove the space at the end.
· PRINT CHAR(27):CHAR(2):"
May 3rd, 2010· Feature - Support screen saves and restores for hosts that use HostAccess and Accuterm PC emulation protocols. For more information...
· Fix - Function key display was getting blanked out when MacWise was hidden and then unhidden.
· Fix - Yellow text on blue background was white instead of yellow. Blue background is now darker.
· Fix - Run AppleScript from the Special Menu was attempting to open a random file if you canceled. Now just open the AppleScripts folder at the Finder level and let you double click.
February 12th, 2010· Fix - Attempting to do a Host to Mac or Mac to Host data transfer would hang if there was no connection open to the host.
· Now an alert will warn you if there is no open connection and will prevents attempts to start a data transfer until the connection is open.
January 25th, 2010· Fix - SCO ANSI Mode now works with multiple insert and delete line commands.
· ESC [ xx L //insert multiple lines.
· ESC [ xx M //delete multiple lines.
January 18th, 2010· Added iPhone and MacWise help item to the Help Menu which launches a web page with information about using VNC iPhone Apps to access MacWise.
December 14th, 2009· Fix - A new window opened from a second monitor could possibly open offscreen as an invisible window.
November 16th, 2009· Opening a new window session was not using the window size of the current window.
· That was causing a problem for people with 25-line screens because the new window was opening as a standard 24-line screen.
· Now, all new windows opened will use the size of the current window as the new window size (if the preferences are set to remember window positions and size).
October 30th, 2009· Installer was using scripts that required Rosetta. New Macs no longer need to wait for Rosetta to load during the install. Note that MacWise has been Intel native since version 11.0 but the installer scripts were not.
August 26th, 2009· Feature - Added an option "No inverse video underlining" to the Video Options window. This allows compatibility with older versions of MacWise that did not allow reverse video to be underlined.
· Fix - Aux / Slave printing. Was printing a blank page as the first page if the host sent a CHAR 12 as the first command. That old programming practice was used for line printers that needed to move the paper to the top of the next sheet of continuous paper. Not needed on the Mac so is now ignored.
July 11th, 2009· Fix - Opening a URL under host control was not working.
· ESC CTRL B < URL CR now works.
· ESC CTRL B > URL CR also works.
Examples:
· PRINT CHAR(27):CHAR(2):"
June 29th, 2009· Fix - Opening function key sets was working OK when double clicking on a fkey set in the Finder. But if you selected "Open Fkeys" from the "Function Key Options" window, you could possibly get a blank fkey set or garbage characters displayed in the function keys at the botom of the screen.
· Fix - Changed the default setting for closing the modem port when quitting. The default setting now hangs up the modem when you quit. (an option under the Dialer Menu, "Disconnect Modem Upon Quit").
April 16th, 2009· Fix - Televideo TV925 Emulation works better with some hosts now. Some illegal host commands are now absorbed instead of producing garbage on screen. Works with Alpha Micro AM-62 as Televideo.
April 7th, 2009· Fix - Intel Macs were not showing the new "FlushOutput Character" option that was added in version 11.61. Also, did not have the MacWise Registration Form option that was added in version 11.53 under the Special Menu. This was because Intel Macs were using an older MacWiseResources file. Was not a problem on PPC Macs.
April 1st, 2009· Fix - Fkeys are now protected from being erased by screen clearing routines.
· Fix - Standard and iPhone sized window fonts were too large for fkeys to fit 7 characters of text. Changed from size 12 to size 10 for those window sizes.
· Fix - Modem Initialization window had an extra text entry field. Removed it.
· Feature - Added “FlushOutput Character = Control F instead of Control O ” to the Telnet Connection window. This allows a Control O to be sent to the host. Otherwise Control O would be absorbed by OS X and used as a FlushOutput character.
March 17th, 2009· Fix - 156 column mode problems.
· When the text switched to 156 column mode under host control, the text size would be correct (smaller) until you started typing. Then it would get larger.
· Also, if you quit in 156 column mode and ran MacWise again, the text size would be too large.
March 9th, 2009· Fix - "Save Settings As..." was causing window problems if several windows were open.
· When you attempted to close a window after saving settings, it could tell you to activate the window first, even though it was already activated.
· Also, could hang when quitting with multiple windows open that had been saved as...
March 4th, 2009· Fix - Some Applescript commands not working - SetCaptureFile, DeleteCaptureFile and CaptureOn.
January 31st, 2009· Feature - French localization added.
· MacWise can now use English or French Menus and Dialog Boxes.
· It automatically uses the Preferred language that is in your International Preferences in OS X.
· If you want to force MacWise to use one language or the other, do a Get Info on the MacWise application and uncheck the language you don't want to use. The manual has not been translated to French yet.
January 15th, 2009· Fix - Could get garbage on screen if host sends cursor to the 10th row using VT100 or VT220 emulation.
January 5th, 2009· Fix - The serial port menu was not getting updated when you selected Open Settings... or double clicked on a settings file. The serial port checked would not change but it was actually using the correct port from the settings file.
· Fix - Opening and closing multiple serial port windows could cause a situation where new windows opened would replace the old window instead of adding a new one.
· Fix - If you selected KeySerial1 port it would cause an error message saying that the port was already open. Then you could not open the real keyspan port.
· Fix - Old serial port was not closing when you selected a new one. If you opened a new window and tried to open the old port, it would tell you that it was already in use.
December 29th, 2008· Feature - Added option to reset all MacWise settings back to default (under the Settings Menu)
· Feature - Added MacWise Registration Form to the Special Menu. It links to the registration form online.
December 22nd, 2008· Fix - Possible hang when processing some VT100 / VT220 ascii codes.
December 8th, 2008· Fix - The Scroll Bar was intermittently getting disabled and dimmed.
· This happened when any data was sent to the screen causing the scroll bar to move while MacWise was in the background. The symptom commomly occured when MacWise was in the background and the host timed out the telnet session, sending the "connection closed by foreign host" message and causing the scroll bar to move.
December 8th, 2008· Fix - Cursor not positioned on the screen correctly if three-digit character position was used in Sco Ansi emulation.
· Fix - Ansi foreground color codes were intermittently turning on underline characters.
· Fix - Clicking on function keys, SF12 or SF13 in the larger 18 point window was causing an array bounds error.
November 14th, 2008· Feature - When MacWise is first run, it now defaults to telnet mode instead of the Mac unix shell. It also launches a Telnet Quick Start help window with instructions for making the telnet connection.
· Also, two new telnet help menu items have been added to the Help Menu.
· Telnet Quick Start.
· Telnet Help.
November 3rd, 2008· Fix - Taking too much time to launch MacWise.
· Caused by changes in version 11.47
· Now back to fast startup time.
October 24th, 2008· Fix - AppleScript commands "CaptureOn" and "SendHostMessage" were not working with previous 11.x versions.
October 6th, 2008· Fix - If you use a barcode scanner as keyboard input, some barcode scanners could intermittently cause the first character to be dropped when scanning a barcode to the MacWise screen.
September 12th, 2008· Feature - New iPhone screen size can be selected from the Window Menu. MacWise can now be accessed from your iPhone or iPod using Mocha VNC http://mochasoft.dk/iphone_vnc.htm
August 14th, 2008· Fix - Screen Textwrap was not being remembered when you quit MacWise and ran again.
July 18th, 2008· Fix - Keyboard input now much faster. If you are using a barcode reader, MacWise can now accept input from the reader at full speed.
July 1st, 2008· Feature -This version adds a new 18-Point font size and large window. This new window size fits perfectly on a MacBook Air screen. It also fits nicely on other MacBook models.
· The new 18-Point Font Window has a size of 1044 X 700. The MacBook Air native resolution is 1280 X 800, so the new MacWise window size leaves 100 pixels at the bottom for your Dock.
· It also fits nicely on a 1024 X 768 screen filling the entire width and leaving room at the bottom for the Dock.
June 26th, 2008· Fix - If the host tried to reset the arrow keys for Wyse 60 or Wyse 370 mode back to default, MacWise was blanking out the arrow keys instead of setting them to Wyse defaults.
June 18th, 2008· Feature - You can now optionally use the 24-point font and large window on a MacBook Air.
· The MacBook Air screen is not tall enough to display the function keys at the bottom of the screen with this larger window. But you can use the function keys from the keyboard.
June 12th, 2008· Fix - Version 11.32 was installing all of the MacWise files at the root level of the drive. The installer should create a MacWise 11 folder inside of the Applications folder. Also, MacWise font was not being installed.
June 7th, 2008· Fix - The Clear key was intermittently not working. It is used in Wyse 60 and VT extended keypad modes.
· Fix - Control E was not working.
May 27th, 2008· Fix - Window transparency value was not being remembered when you quit.
· Fix - Half duplex mode was not being remembered when you quit.
May 20th, 2008· Fix - Terminal type may have not been recognized by the host with telnet connections.
· The terminal type you enter in the Telnet Connection... window may have been ignored on some Macs. This problem surfaced in MacWise version 11 because it is faster than version 10 and was sending the telnet environment commands to the Mac unix shell too fast before opening the connection.
May 13th, 2008· Feature - More VT220 keys supported - Insert, Del, Home and End. The help key is used as the Insert key or you can use Option i. (Help keys on some keyboards are labeled ins / help).
· Fix - After opening a new serial connection, the emulation window was not active until you clicked on it.
· Fix - If preferences were set to "Mouse click sends column,row to host", then clicking the mouse was sending row 11 to the host instead of the actual row.
May 6th, 2008· Feature / Fix - Sped up event timing to make keystrokes faster. Auto key repeat is now faster.
· Fix - When the host switched to 132 column mode, it was possible that text would not appear on the screen to the right of the 80th column in some rare cases.
· Fix - When you switch to 24 point window, the 132 column font will now change to 12 automatically, Also when you switch to 16 point window, it will change 132 column font to 9 automatically.
· Fix - Now supports Origin Mode for VT100 / VT220
· Fix - Allow Control O to be used with telnet when the "Use TC Shell" option is disabled.
· Fix - Possible array bounds error if textwrap was turned off.
April 26th, 2008· Fix - VT100 / VT220 emulation. When capturing text to a file or the clipboard or printing, it could be possible to output a blank line if the line was longer than the standard width and textwrap was off. The line of text would appear on the screen but not in the text output to the file, clipboard or printer. This problem was only in MacWise versions 11.19 and 11.2
· Fix - If you selected SCO ANSI emulation, the Window Menu would have a checkmark on Standard Window as well as the actual window size you were using.
April 22nd, 2008· Fix - VT100 / VT220 top and bottom margin problems. Now works correctly with DEC VMS ev Editor.
· Fix - Allow host to enable and disable textwrap for VT100 / VT220
April 12th, 2008· Feature - Added Use SLnet options with Kermit to the Preferences window.
· This lets you use Kermit to log into hosts that are using Seattle Lab's SLnet telnet server. This option should not be enabled if your host is not using SLnet.
· Kermit file transfers may not start if this option is set incorrectly.
· Feature - Added ? help icon in the Preferences Window. When you click on this icon, you get a help window explaining all of the preferences options.
· Fix - If you double clicked on a function key and changed the title, the change would not be remembered. This problem was introduced in version 11.15
April 10th, 2008· Fix - VT100 arrow keys were not working in emacs editor. It uses Set Mode arrow keys.
· Fix - Could not send Control L or Control K from the keyboard.
April 4th, 2008· Feature - Arrow Keys can now be programmed with multiple control and escape sequences.
· Fix - If using Command [ or ] to switch windows and you did it too fast, the check mark in the window menu would end up on the wrong window item and it would not allow you to switch windows until you clicked on one to select it.
· Fix - Left arrow could not be programmed with Viewpoint Emulation.
· Fix - VT100 / VT220 arrow keys.
April 3rd, 2008· SPEED! Runs natively on Intel and PPC Macs. No more Rosetta. This was accomplished by converting the entire MacWise project from Basic to C.
· Added an option to enable or disable raw Unix mode for telnet, secure shell and the Mac Unix shell. This provides more compatibility options for connecting to host computers via the Mac Unix shell. This was always enabled for previous versions of MacWise. Turning off this option may let you log into hosts that would not respond to keystrokes.
· Added a "?" icon to several dialog boxes, which links to a "Help" pop-up, and added "Help" to many dialog box items, which appears when you hover the mouse over the text.
· Cleaned up the MacWise 11 folder by creating more folders and moving all help files inside.
· Connection Scripts... is located under the Connection Menu now instead of the File Menu.
· The standard Apple installer is now used.
· Fix - None of the document icons were working in Leopard. Now, the Phone icon, QuickDial icon, Fkey icon and Settings icons work.
· Fix - Mouse Click Delimiter window was returning back to emulation window when closed. Now returns back to preferences window, as it should.
March 26th, 2008· Fix - Copy and paste was not working from the Edit Menu when dialog boxes were open.
· Fix - If Caps Lock enabled in the Emulate Menu, then change to lower case if shift key down or caps lock key down.
· Fix - Lassoing a section of text on the screen was not working if you dragged the mouse from lower right to upper left. Also, the starting point of the drag is now accurate.
· Fix - Installer now warns you if MacWise is running and must quit before new version of MacWise is run.
March 21st, 2008· Fix - International dialog box was not letting you select any foreign languages.
· Fix - Shifted function keys from the keyboard were not working on some Macs.
· Fix - Could not turn capture on and off with keyboard command C.
March 19th, 2008· Feature - SCO ANSI function key set is now included in the fkeys folder.
· Fix - Function keys were still not working with some Macs.
· Fix - If MacWise was not running and you double-clicked on a settings file, It would try to use International as the settings file. Since International is not a settings file, the settings would become corrupted.
· Fix - Phone dialer settings files were not working when double clicked on them.
· Fix - Typing a P was sending a Control P also. Problem introduced in version 11.06
March 9th, 2008· Page up / Down keys were causing a crash.
· Printing multiple pages was printing garbage or left over text from earlier in the document on the last page. Reverted back to the 10.9 printing routine for now.
· Scroll commands from the host were scrolling in the wrong direction.
· If you had Print Screen as Graphic selected in Printer Setup, you would crash when you printed the screen.
· Selecting Fkey Sets... from the Emulate Menu was disabling the scroll bar.
March 4th, 2008· SPEED! Runs natively on Intel and PPC Macs. No more Rosetta. This was accomplished by converting the entire MacWise project from Basic to C.
· Added an option to enable or disable raw Unix mode for telnet, secure shell and the Mac Unix shell. This provides more compatibility options for connecting to host computers via the Mac Unix shell. This was always enabled for previous versions of MacWise. Turning off this option may let you log into hosts that would not respond to keystrokes.
· Added a "?" icon to several dialog boxes, which links to a "Help" pop-up, and added "Help" to many dialog box items, which appears when you hover the mouse over the text.
· Cleaned up the MacWise 11 folder by creating more folders and moving all help files inside.
· The standard Apple installer is now used.
March 3rd, 2008· Was getting a file error with Permissions error statement if the Carnation Software Prefs folder did not exist. Also, that folder and the MacWise Prefs folder would not be created if it did not exist. Consequently, none of your settings would be remembered when you quit. You would not get this error if you had already installed MacWise 10.9 or earlier.
· None of the document icons were working. Now, the Phone icon, QuickDial icon, Fkey icon and Settings icons work.
· Was getting File Error File in Use by another application if you turned capture on without making a new capture file first.
February 28th, 2008· Function keys struck from the keyboard were not working. Could click on a Fkey and OK.
· Connection Scripts were not working
· If screen was black background and you hid MacWise, it would turn to white when you returned back to MacWise.
February 27th, 2008· Remember window width was not compatible with MacWise 10.9 or older. Window width changed when you upgraded from an earlier version to version 11 if you had Remember Window Position enabled.
· Host-To-Mac Transfer was timing out immediately because the 5 or 10 second buttons were being ignored.
· Command Period now works to cancel out of data transfers.
February 25th, 2008· Older Macs running OS X 10.2 would crash trying to display the splash screen.
· Added error checking when saving a settings file and warn user if permissions problem caused an error.
February 20th, 2008· Host controlled data transfer programs that use ESC ~5 are working now.
· ESC ~ routines for host controlled data transfer were not working in VT100 mode.
· Removed close button and window title from Preferences window.
· Mouse Click Delimiter window was returning back to emulation window when cllosed. Now returns back to preferences window as it should.
· Animated watch cursor now works during data transfers.
February 6th, 2008· Fix- Changed the default in Telnet Connection... to Use the TC Shell to Login. When this option is enabled, it can prevent connection closed by Foreign Host during login or the host not recognizing your terminal type.
· Fix - When you changed colors and clicked OK, you would get a thin vertical line next to the scroll bar that was the color of the previous screen.
· Fix - If you selected Video Attribute Colors from the Emulate Menu and clicked OK, the MacWise window would dissapear and become 100% transparent. But if you selected Colors from the Window Menu, there was no problem. Both OK now.
January 23rd, 2008· Fix - Page Setup was not being remembered when you quit.
· Fix - If you canceled out of Open Document... you would get an error.
· Fix - Check for MacWiseResources.nib file. If it is not in the same folder as MacWise then warn and quit. Otherwise, you just end up with all the menu items missing. (MacWiseResources.nib needs to be in the MacWise folder with the MacWise application)
· Fix - Auto Nopage for Host-To-Mac Transfers was not being saved upon quit.
· Also, the default is now off instead of on.
January 16th, 2008· Feature - Removed the 256 character-per-line limit for Mac-To-Host data transfers when 'Display Text During Transfer' is on.
· Also, added an option to send CR/LF after each line is sent to the host.
December 27th, 2007· Fix - If the window size was saved as a size smaller than 20 pixels, the window will now open in a standard window size when MacWise is run again.
December 8th, 2007· Fix - SCO ANSI emulation used with VT100 / VT220.
· Garbage characters on screen, graphic drawing lines not working, colors wrong.
Note: In addition to this fix, it is important to have your settings match the host settings. Every host is different, but the following settings might work for you if you are using SCO ANSI emulation:
· VT220
· SCO ANSI
· term type, ansi
· IBM Set 2
· Wyse Multinational
· Uncheck Strip 8th bit
· Feature - When you select an emulation that uses hidden attributes, an information window will appear to let you know the status of the attributes (hidden or non-hidden).
· Also, this version changes the default hidden attributes for Wyse 60 to hidden.
November 30th, 2007· Feature - Added Option Do not wait for echo characters from host"
· in the Mac-To-Host Transfer Options window.
· Fix - Opening a new window from a settings file was not opening at the correct size stored in the settings file. It was using the current window size.
· Fix - If the connection is not open when doing a host to mac or mac to host transfer, it will now open automatically before starting the file transfer.
· Feature - Added option to Cancel when closing the last window.
November 7th, 2007· Fix - Page Setup window was causing problems in Leopard. After using Page Setup, the MacWise window would flash when you clicked on the title bar or when you clicked on the function key buttons and the buttons were slow to respond to clicks.
· Fix - Yellow and Green buttons for minimizing and maximizing the window were dimmed.
November 6th, 2007· Fix - Scroll bar thumb was not moving to the bottom automatically, as it should.
· Problem was introduced in version 10.9.20
October 22nd, 2007· Fix - Could not Add to Phone List or Edit Phone Number.
· Problem was introduced in version 10.9.20
October 20th, 2007· Fix - Editing Fkeys or Connection Scrips would allow you to hit the carriage return key to create a new line in the edit field. Carriage return should not create a new line in edit fields.
Find us on Google+
