May 3rd, 2013· Plugins with active presets and side-chain now have side-chain peak meter on the easy screen.
· Added full automation/modulation to signal generators including LFOs.
· Added "Banks" mode for multiparameters, which lets you interpolate between several banks of parameter values.
· Improved signal generator smoothing performance.
· Increased unit grid visibility in all graph editors.
· Colors slightly adjusted for better visibility.
· Fix: Randomization sometimes triggered "next/previous preset" load.
· Fix: Plugins always received MIDI channel 1 under Cubase 7 using VST3.
· Fix: Step sequencer shapes were not saving correctly.
· Fix: Plugins could crash when fed with "poly pressure" even via VST3.
· Fix: Plugins could occasionally temporarily freeze in VST3 when being automated during upsampling change.
· Fix: Double click on Cocoa GUI on Mac OS X didn't work well with normal clicks.
January 28th, 2013· Added a new GUI mode based on buttons, which saves space and is especially designed for those with small resolution displays.
· Oscillator step sequencer now support multiple step shapes.
· Added 1/3 oct and 1 oct mode to all analyzers.
· Improved modulator pitch detector accuracy and response.
· Added linear harmonics mode to all parameteric (dynamic) equalizers.
· Added envelope curvatures: saw, triangles and sines.
· MWaveshaper & MMultiBandWaveShaper: Added asymmetric shaping, which can generate even harmonics. Added DC blocker and default mode is now linear.
· Modulator values can now be automated.
· MAutoPitch, MTuner: Improved pitch detection algorithm.
· Improved switching between editor modes.
· Added input level peak meters to multiband plugins.
· Oscillator harmonics graphs' units now follow number of harmonics.
· Added "Invert" feature to all parametric equalizers.
· Plugins now provide only those channel modes, which make sense for them.
· Fix: MMultiBandDelay could increase amount of required memory under certain circumstances.
· Fix: It was possible to crash the plugins by creating a cycle using multiparameters.
· Fix: Modulator sync didn't update when automated/modulated.
· Fix: MRhythmizer didn't store filter range correctly.
· Fix: Modulators did crash in envelope mode when side-chain had been enabled.
· Fix: Installer on Windows didn't move shared IRs into the new location.
· Fix: Analyzers didn't store "Enable when hidden" mode.
· Fix: MMultiAnalyzer named all presets "0".
· Fix: VST3 MIDI controllers could respond incorrectly when used before a high latency plugin in Cubase.
· Fix: The plugins could crash in Wavelab 6.
October 25th, 2012· Added virtual keyboard to all edits.
· Phase of all oscillators can now be adjusted directly by dragging the graph or fine-tune using mouse-wheel.
· Added speed parameter to modulator's pitch detector.
· Added multiparameter reorder feature.
· Improved user interface layout of some plugins.
· MStereoProcessor - Phase scope optimizations.
· MReverb & MMultiBandReverb - Improved position editor visualisation.
· MMultiAnalyzer - Added custom names.
· MRhythmizer & MMultiBandRhythmizer - Added speed-up parameter.
· MMultiAnalyzer - Added "Global disable" switch.
· MMultiBandDelay - Added Left offset parameter, added freeze click protection.
· MDynamicEq & MAutoDynamicEq - Default band mode is now "squared".
· MAutoDynamicEq - Smoothness is now available from the main screen for easier workflow.
· MTuner - Added base frequency parameter.
· Fix: MVocoder was crashing in L/R mode in some hosts.
· Fix: Modulator randomizer used to select MIDI controller parameters for modulation.
· Fix: Activation could fail when clicking outside the confirmation window.
· Fix: File dialogs didn't update list of files when predefined folders or drives have been selected.
· Fix: A few plugins could crash on 64-bit platforms in projects exceeding 4GB.
· Fix: Note controllers did work if controllers have been enabled.
· Fix: Pitch-bend hasn't been detected accurately.
· Fix: A few parameter didn't respond to modulator/multiparameter learn.
August 24th, 2012· Sonogram highly optimized in all analyzers and smoothness doesn't have effect on it anymore.
· Delay lines optimized.
· Added saturation and freeze features to MMultiBandDelay.
· General processing kernel special-case optimizations.
· Number of MIDI controllers increased to 32 and the ranges can be automated/modulated.
· Added parameters triggering load previous/next preset and a dedicated MIDI controller for changing presets.
· MIDI controllers are now disabled by default in presets.
· Added LR encoding feature to MVocoder.
· Installers now remember VST/VST3 plugin paths on Windows and updaters are therefore not used anymore.
· Fix: Analyzer super-resolution were causing subaliasing.
· Fix: Restore when disabled modulator feature sometimes didn't work.
· Fix: MMultiBandDelay was slightly clicking when switching right offset around 0ms.
· Fix: Compatibility issues, mainly with Live.
· Fix: MVocoder - saturation wasn't working when whitening has been enabled.
· Fix: MIDI controller max value is now 100% by default.
· Fix: MAutoPitch - on some machines and hosts it was creating distortion effects when Width wasn't 0%.
July 16th, 2012· Smart randomization algorithm - new smart randomization engine randomizes everything reasonable parameter in the plugin, including modulators, and chooses settings wisely for much better results. On easy screen only multiparameters are randomized.
· Added AGC (automatic gain control) which ensures the output sounds as loud as the input making preset browsing and randomization much easier.
· Added lots of presets for most creative plugins.
· Ultra-advanced follower borrowed from MDynamics engine is now used in every modulator (+hold, attack/release shape and much more...)
· Oscillators can now load custom samples (WAV, MP3, FLAC) and mix them with other sources (oscillator, envelope, step sequencer).
· Ctrl+click on a "Presets" button loads a random preset.
· Added global modulator switch, presets and randomizer.
· Added band presets and band randomizer for multiband plugins.
· Added signal generator shape menu images, presets and randomizer.
· Added denoiser active preset for MSpectralDynamics.
· Added active presets for MDynamicEq and MAutoDynamicEq.
· Switched to VST3 3.51.
· MBandPass: All filters except 6dB/oct are now resonant, added gain & dry/wet.
· MLoudnessAnalyzer: Added true-peak meter, offset parameter.
· MUtility: Added dual panorama.
· Added Hold parameter for the modulator follower mode.
· All momentary & short-term loudness meters now have maximum value indicator.
· Delay mode is now "classic" by default.
· "Auto-tune" panel in MAutoPitch renamed due to copyright law violations.
· Fix: MLoudnessAnalyzer's loudness range meter didn't use correct ballistics.
· Fix: Harmonizer in granular mode crashes when upsampling and high grain size.
· Fix: MLoudnessAnalyzer wasn't resizing when multiple channels have been set.
· Fix: A few compatibility issues, upgraded to VST 3.51.
· Fix: Analyzers didn't work correctly in left + right mode.
June 29th, 2012· Plugin settings storage optimized for lower size and higher speed.
· Multiple modulator & multiparameter windows can now be open at once.
· Added "OnOff" mode into MIDI note controllers and increased their number.
· Default modulation wheel for dry/wet is now disabled due to problems with some hosts e.g. Sonar X1.
· Vocoder, Waveshaper, Dynamics, Freeform equalizer, Spectral dynamics, Rhythmizer (first 4 sequences of each type), Granular (first 4 transformations) graphs can be automated (first 5 points). Note that modulation can require lots of CPU.
· Changed MMultiBandHarmonizer selected key color.
· Added predefined directories and drives in all directory trees.
· Multiband peakmeters now occupy more space for better visibility.
· Added range to MIDI note controllers.
· MMultiBandHarmonizer now reports latency.
· LU meters in integrated mode now provide the gating algorithm according to the EBU standard.
· Added band expand for all multiband plugins.
· Loudness meters now highlight the -1..+1 LU target region.
· MModernCompressor - added another auto-compression button which doesn't change attack/release/rms.
· Fix: A few plugins were crashing in knob mode.
· Fix: Band editor collapse button is now visible only in edit mode, not in active presets screen.
· Fix: Smoothness didn't update in MAutoDynamicEq unless analyzer/sonogram was enabled.
· Fix: MIDI controller presets didn't load and update immediately.
· Fix: Advanced convolution kernel settings may not have been working properly.
· Fix: Mouse wheel didn't move much with high-resolution mouses.
· Fix: Crossover bands moved to the left made them immovable.
March 7th, 2012· Huge memory and GUI optimizations, new knob based interfaces.
· Each oscillator can now also be controlled using harmonics instead of shape.
· Added "double" envelope shape type.
· Analyzer & sonogram can now optionally be enabled even when the GUI is hidden.
· A-H presets now send automation when changed.
· MIDI note controllers now react on pitch-bend immediately.
· Added feedback phase invert and saturation for phasers.
· Added second tape mode for flangers.
· Added knob mode for most plugins, which turns their slider based GUI into knob based one.
· MSpectralDynamics can now capture the threshold curve based on the input signal.
· MDynamics and MMultiBandDynamics weren't showing correct shapes for upwards expander.
· Added IR phase invert and left/right delays for MMultiBandConvolution.
· Fix: Drag & drop wave file for analysis didn't work in MAutoEqualizer.
· Fix: MAutoEqualizer could crash under specific circumstances when automating gain.
November 15th, 2011· All plugins are now Mac64 compatible.
· Improved GUI behaviour, especially on Apple.
July 31st, 2011· It is now possible to override the default editor size in Settings.
· Added threshold and high-accuracy mode to pitch mode of modulators.
· Added check for updates feature into each plugin's settings.
· Fix: VST3 was causing crashes under some hosts and specific configurations.
· Fix: Envelope draw mode didn't work well with snap to grid enabled.
· Fix: Popup windows with some keyboard shortcuts could lead to a crash on Mac.
· Fix: Upsampling latency being reported was invalid.
July 11th, 2011· LU meters can now show momentary, short-term and integrated loudness.
· Added pitch detection mode for modulators.
· Added higher-quality filters for upsampling rates above 200kHz.
· Easy screen active presets now automatically attach mouse wheel and MIDI controllers from 21 to easy screen knobs.
· Optimized updating of user interface when hidden.
· Random modulator mode now works even in wave editors, which do not provide tempo and position.
· Styles are now installed to both admin & user data folders to avoid problems with systems with user accounts.
· Added MAutoPitch and MOscillator free plug-ins.
· MDynamics, MMultiBandDynamicsLarge and MModernCompressor now have a 6-band parametric side-chain equalizer.
· Added loudness meters to MDynamics and MMultiBandDynamics easy screen.
· Added ducking active preset for MDynamics.
· Equalizer band points are now slightly smaller.
· Added tempo-sync mode for MRhythmizer (enabled by tempo on maximum value).
· Added note-off processing for MRhythmizer, which switches back to sequence 1.
· MRhythmizer now correctly processes sequences with signature lower than the song's signature.
· Added Protection against glitches when hosts tempo is being changed for MRhythmizer and MMultiBandRhythmizer.
· MIDI Pitch-bend is now independent on pitch parameter in MMultiBandHarmonizer and has range of 2 semitones up and down.
· Fix: Mono->Stereo processing could cause crashes in some hosts such as Bidule.
· Fix: Delete and backspace keys have been swapped on Mac.
· Fix: Loudness meters text value was showing "silence" with values under 0 LU.
· Fix: Dragging equalizer Q didn't work very well on Mac.
· Fix: MEqualizerLinearPhase and MAutoEqualizerLinearPhase were showing half roll-offs (12dB/oct instead of 24db/oct).
· Fix: MAutoEqualizer's draw comparison envelope wasn't following resolution units correctly.
· Fix: MCompressor didn't display gain reduction and peak levels between multiple channels.
May 18th, 2011· Dual user interfaces - most commercial plugins now contain 2 interfaces, a simple default one with several predefined modes, but just a few controls, and an advanced one. This makes the plugins not only extremely versatile, but also quick and easy-to-use.
· Unique new analysis engine for MAnalyzer and all equalizers - new analysis engine is faster, more accurate and provides a whole new range of unique features, such as micro-sonograms, full sonograms, super-resolution (providing high resolution for low frequencies keeping speed for the high frequencies), prefilters (for loudness curves) or deharmonization (for easier fundamental frequencies analysis).
· Plugins are now categorized under VST and VST3 - with more than 55 plugins it started to be hard to find the plugin you need, therefore they are now categorized by purpose to Dynamics, EQs etc. With VST3 they also fit the standardized structure in your host (if it supports it).
· Added next/previous preset buttons.
· Added A/B switch to swap between previous two A-H presets.
· Added 0% & 100% modes for global dry/wet for all multiband plugins.
· Increased accuracy when dragging Q in equalizers.
· Added "use first parameter's range" mode for modulators and multiparameters.
· Added a few shortcuts to control zooming in graph editors.
· Added global surround switch useful to make the plugins more compatible with some hosts.
· Added resizing arrow for resizable windows.
· Added smooth 2 envelope point mode.
· Upsampling range extended to 16x.
· Multiband peakmeters can now show different channels in surround.
· Optimized preset and settings storage.
· Preset exchange is now enabled by default, can be disabled in Settings.
· Fix: Resizing windows with splitters changed ratio of the splitters.
· Fix: Resizable windows were sometimes showing arrow cursor over a position, where the window couldn't be resized.
· Fix: Demoversions with sidechain were crashing occasionally.
· Fix: Plugins with sidechain were occasionally crashing on Mac AU.
· Fix: A Windows message was poping when trying to access an unavailable drive.
· Fix: Upsampling latency wasn't reported correctly.
· Fix: Improved automation support with Ableton Live.
· Fix: Plugins didn't store bypass state.
· Fix: Multiparameters in switch mode were showing inverted state.
· Fix: Alt+Click in a graph editor caused maximum zoom, which is now disabled.
· Fix: Units in zoomed mode were sometimes showing invalid grid lines.
· Fix: Temp gain wasn't updated when automated/modulated.
November 16th, 2010· Graph editors now show smart units even in zoomed mode and snap-to-grid works as well.
· Fix: Updaters didn't work on Windows with some specific paths.
October 27th, 2010· Major performance improvements - our plugins are now even faster than before on modern processors. We measured processing improvements of up to 300% with some plugins and user interface is now much faster as well, especially on Mac OS X.
· Online preset exchange - all plugins can now automatically share your presets on our servers and download new ones (if enabled of course). This way everyone can have an unbelievable set of presets using our extremely versatile plugins. We are building a community and you can be a part of it!
· ADSR editors (e.g. in modulators) can now have custom shapes.
· Added step-sequencer generator into any envelope/graph editor.
· When activating you can now use drag & drop, clipboard and also locate the licence file using a browser.
· Fix: Trigger and switcher multiparameter modes weren't working correctly.
· Fix: Modulators and multiparameters weren't learning correct parameters of signal editor.
· Fix: Plugins could crash on Win64 when project exceeded 2GB.
· Fix: Plugins crashed when moving a multiparameter during learning
July 30th, 2010· Multiparameters can now work as switchers or triggers, which modify target values over certain time period.
· Smoothness can be automated/modulated on every signal generator.
· Signal generator contains phase adjustments for harmonics.
· Multiparameters range can now be automatized and default value can be configured.
· MStereoexpander has been optimized and bandpass interval enlarged.
· Plugins are now reporting tail in VST3 and AU, which can be used by host for otimizations.
· Points of any envelope graph editor can now be locked.
· Fix: Multiparameter values weren't stored properly.
· Fix: Plugins weren't recognizing spacebar on Mac OS X.
· Fix: Copy&paste in color dialog in style settings didn't work.
· Fix: Installers on certain Windows system failed because of a missing system directory.
· Fix: VST3 compatibility with FL Studio.
June 23rd, 2010· Kernel heavily upgraded and optimized.
· A-H presets can be switched via program change MIDI message.
· Last randomization can be undone by holding shift and pressing Random button.
· Optional confirmations on destructive actions.
· Advanced oscillator shape processing graphs enabled only when turned on.
· Added bypass to the title.
· Fix: MIDI and general settings save/load.
· Fix: Preset selector couldn't expand/collapse folders.
June 17th, 2010· Kernel heavily upgraded and optimized.
· Smart-learn feature for all modulators and multiparameters - just enable it and move anything in the plugin and the modulator/multiparameter will learn what parameters you used including intervals.
· A-H presets can be switched via program change MIDI message.
· Last randomization can be undone by holding shift and pressing Random button.
· Optional confirmations on destructive actions.
· Advanced oscillator shape processing graphs enabled only when turned on.
· Phase is now represented in degrees and percents.
· Smart interpolation for vibrato and flanger minimizing artifacts when modulating depth.
· MIDI and general settings save/load.
· Preset selector couldn't expand/collapse folders.
· Oscillators caused jittery images when modulating shape.
May 12th, 2010· Added automation/change protection for maximum & adjustable quality when changing parameters.
· ABCD morphing now automates only relevant parameters to save storage and minimize hosts CPU hit.
· Randomization & loading now reinitializes plugin to remove possible artifacts from previous state.
· Fix: Some help windows weren't sized correctly.
April 21st, 2010· Added LR/MS/L/R/M/S/LR-/surround processing - almost all plugins can now process stereo-mono, just left, just stereo and other combinations instead of left-right channels.
· Added random move feature - when you hold ctrl and press "Random" button, no new random settings are generated, but the current configuration is slightly modified. This is useful to tweak already interesting settings.
· Added "through-null" mode.
· Clumsy configuration menu replaced with a configuration window.
· Fixed several compatibility issues
· Fix: Range didn't show correct value.
· Fix: Cancel in submit preset did send the preset anyway.
· Fix: Multiband link did work for the first band only.
· Fix: Upsampling could crash on hosts with multicored initialization.
March 12th, 2010· Improved sinc interpolation quality.
· Improved upsampling algorithm performance.
· Improved compatibility with several hosts.
· Fix: Plugin reset removing tails.
· Fix: Multichannel processing wasn't optimized enough and caused crashes.
· Fix: AU MIDI input.
· Fix: Denormalization problems causing high CPU usage when processing silence.
March 9th, 2010· Added mono and surround compatibility - most plugins can now handle from 1 to 8 channels.
· Fix: Denormals causing low speed of upsampling.
Find us on Google+
