March 29th, 2012· [BUG FIX] Fixed map-list-related updates to properly handle usernames containing "'".
February 4th, 2012· [BUG FIX] No changes since 5.5.4b2.
January 14th, 2012· [BUG FIX] Added support for Barracuda firmware 5.1 (103954).
December 13th, 2011· [BUG FIX] Fixed a server crash when a notification that uses JavaScript produces an email subject that is the empty string. (102495)
· [BUG FIX] Fixed ASSERT when snmpwalk is invoked via server command. (102498)
November 22nd, 2011· [BUG FIX] Updated utility used by Flows installer to know about the correct new InterMapper Settings location. (101775, others)
November 9th, 2011· [BUG FIX] Fix check for editing retention policies (101131)
· [BUG FIX] Don't allow built-in retention policies 'None', 'Forever', or '24 Hours' to be edited.
· [BUG FIX] Fix a segfault when deleting a device that happens to be selected in the chartables window.
July 16th, 2011· No changes since 5.4.5b1.
July 15th, 2011· No changes since 5.4.4b6.
April 12th, 2011· [BUG FIX] Fix an issue with the Layer 2 engine. It did not work at all if the InterMapper Remote Server port was changed to a value other than 8181. (96900)
March 11th, 2011· [BUG FIX] Polling a Cisco device with an empty context list, or a list that doesn't contain any identifiable VLANs useful for community string indexing, caused a segmentation fault. (96027, 96039, 96015, 96050)
· [BUG FIX] Added logging around failures involving one-time passwords. Changed the timeout for OTP from 10 to 60 seconds.
· [BUG FIX] Reverted a change from 5.4b11: "Use the presence of the dot1dBaseBridgeAddress MIB variable to identify a switch, instead of sysServices."
March 8th, 2011· [BUG FIX] Fixed a problem with thread safety in name resolution tasks.
· [BUG FIX] Fixed a file permission crash when running the --check-upgrade command-line option.
· [LATERAL] Changed the threshold for detecting broadcast devices from 5 to 4 to improve the detection. (95870)
· [FEATURE] Labels for datasets now allow specification of units for the data in a way that can be readily parsed. Reports will eventually use it. (91271)
March 4th, 2011· [BUG FIX] Fixed a problem with thread safety in name resolution tasks.
· [BUG FIX] Fixed a file permission crash when running the --check-upgrade command-line option.
January 14th, 2011· [BUG FIX] Handle too-short WINS packet without ASSERTion failure. (93169)
· [BUG FIX] Improved license certificate selection algorithm when choosing from two FULL certificates to choose certificate with later maintenance contract expiry. (93105)
October 22nd, 2010· [LATERAL] Add probe name to debug log entries flagging bad "defined" syntax in a custom SNMP probe.
September 16th, 2010· No changes since 5.3.5b1.
September 14th, 2010· [FEATURE] Added support for "SECURE:NO_TLS" option in SSL-enabled TCP probes. (89918)
September 9th, 2010· [LATERAL] Updated sFlow probes to show the collector address in the table as a dotted-decimal IP Address, instead of its hex equivalent.
July 13th, 2010· [BUG FIX] On Mac OS X and UNIX, pipes are now closed properly avoiding exhaustion of file descriptors and a crash.
June 18th, 2010· [BUG FIX] Fix a bug which allows some recently added/modified strings related to license activation to match for translating to other languages.
June 14th, 2010· [BUG FIX] Fixed crash on MacOS and UNIX when sending multiple modem paging or SMS notifications. (84829)
· [BUG FIX] Minor fix to the way we handle stackwalks on Windows.
April 15th, 2010· [BUG FIX] Do not overwrite the existing SSL private key when generating a new CSR/private key pair.
March 4th, 2010· [LATERAL] Removed graph ID from map name in log messages. If you have scripts which parse the event log, you may need to make modifications to them.(82444)
· [LATERAL] The Mac installer now preserves Java VM options, such as those used to increase the heap size. (82126, 53401, 60103)
· [LATERAL] The Mac installer repairs permissions on /usr/local/bin to 0755, in case they have inadvertently changed.
· [LATERAL] Server now supports generation of RSA private keys larger than 1024 bits for SSL certificates. (82559)
· [BUG FIX] Fix an issue where a client connecting with an unrecognized locale causes an exception to be raised, and the ensuing stack walk causes a polling interruption. (82621)
February 17th, 2010· [BUG FIX] Improve the InterMapper service's shutdown handler interaction with the OS to communicate more effectively with the OS the length of time shutdown is expected to take. (82047)
· [BUG FIX] Improve InterMapper's performance while exporting to the database and while viewing charts. (80730, 81713, others)
January 26th, 2010· [LATERAL] Enhanced the InterMapper Engine Status probe for better diagnostics in case of problems with the InterMapper server.
· [BUG FIX] The Windows installer now correctly preserves the started/stopped states of the IM & IMDC services.
· [BUG FIX] The IMDC service now correctly defaults to manual start-up after a fresh install on Windows.
December 14th, 2009· [BUG FIX] Allow underscores ("_") in domain names. (80133)
December 9th, 2009· No changes since 5.1.7b2.
November 11th, 2009· [BUG FIX] Fixed an issue in InterMapper Control Center on Mac OS X 10.6 (Snow Leopard) where the "run at startup" setting for InterMapper Server was cached in an OS file, leading to inconsistencies.
· If you used the Start button in InterMapper Control Center to start InterMapper on Snow Leopard, you may need to clear the cached value after upgrading to this version. To do so, open a Terminal and type "sudo defaults delete /var/db/launchd.db/com.apple.launchd/overrides com.dartware.InterMapperServer"
October 22nd, 2009· [BUG FIX] Barracuda probe did not work with new firmware version 4.0. (73085,76064,76086)
October 2nd, 2009· [BUG FIX] Do not automatically assign names to interfaces in IM Flows, if IM Flows' build number is < 4660.
· [BUG FIX] Close all connections to server extensions when the extension list is reloaded. This change fixes an edge case where IM Flows server is running remotely, but netsaw.jar is updated locally.
· [BUG FIX] InterMapper will now allow you to add devices with DNS names that begin with a single digit label, in spite of RFC 1035.
· [BUG FIX] InterMapper will not log a message to the console when you click Cancel in the IMCC authorization dialog on Mac OS X.
August 26th, 2009· [LATERAL] Added a raw server command "regenerateuuid" to forcefully regenerate an IM Server's UUID for IMDatabase testing.
· [BUG FIX] Fixed handle leak that could cause NT Services probes to fail with the error "Not enough storage is available to complete this operation" or related errors. (74451)
· [BUG FIX] Fixed display of multiple edges in the web interface when some were hidden. (74250)
· [BUG FIX] Fixed display of the status window in Google Earth. (74367)
· [BUG FIX] Fixed modem initialization for SMS notifiers on Windows. (74744)
· [BUG FIX] Fixed a crash that could occur when a version of the InterMapper GUI or IMRA earlier than 5.1 attempted to set the probe on a probe group, or when a probe group was part of a mass execution in the 5.1 version of the InterMapper GUI or IMRA. (74603, 74809)
· [BUG FIX] Address field text should have whitespace trimmed off ends. (74883)
· [BUG FIX] Re-implemented IMDatabase export of datapoints using asynchronous I/O. This makes it much faster. Linux 2.4 kernels and aio-less FreeBSD kernels still use synchronous reads.
· [BUG FIX] The built-in web server now streams large files from disk using asychronous I/O also.
· [BUG FIX] Fixed an obscure bug which caused an assertion to fail when more than one compression stream was active simultaneously.
· [BUG FIX] The Chart Data folder on Mac OS X has been renamed to include .noindex. This small change improves IMDatabase performance when there are many chart data files, due to the way that Spotlight processes files when they are closed. There is now a symbolic link pointing to the new Chart Data directory.
· [BUG FIX] If ungrouping a probe group would cause the user to exceed their licensed device limit, set the map to non-polling immediately, as we do for paste. (74882)
July 25th, 2009· [LATERAL] In a line stream connection, suppress logging of partial last lines as it happens routinely. (74393)
· [BUG FIX] The Interface list for the local machine (displayed in Server Settings) now reports the correct subnet mask for VMWare Fusion virtual interfaces on Mac OS X. (64549)
· [BUG FIX] Fixed problem where InterMapper on Mac OS X 10.5 would not save a server's trust information in the KeyChain, due to misconfigured HOME environment variable in IMCC. (74156)
July 22nd, 2009· [FEATURE] Added a SIP probe under Servers-Standard for testing VOIP servers.
· [LATERAL] Suppress error dialogs during automatic update checks in IMTray.
· [LATERAL] Increased the number of simultaneous TCP probes supported on Windows.
· [LATERAL] Added a "tcpprobe" raw server command for diagnosing issues with "stuck" TCP probes.
· [BUG FIX] The NRPE probe now uses Anonymous DH for its client SSL connection.
· [BUG FIX] In a line stream connection, if the stream is disconnected, return what data there is even with or without line termination.
June 26th, 2009· [LATERAL] Added instrumentation which may help track down certain types of DNS issues.
· [LATERAL] Probe group member probes are now displayed in the status window in a predictable order. (Alphabetical by probe name, then by label.) (73908)
· [BUG FIX] Correctly handle sparse ifTables, as reported by certain Cisco devices. (73648)
· [BUG FIX] Truncate SMS notifications to 160 characters and add log entry about it. (73733)
· [BUG FIX] Allow more than 63 characters for the combined USM information in the 'snmpwalk' server command. (73812)
· [BUG FIX] Return error and avoid crash when IM Auth server is disabled during remote login. (73842)
· [BUG FIX] Map status probe now correctly reflects map status due to automatic acknowledgement of probe group member probes in indefinite maintenance mode. (73617)
June 17th, 2009· [LATERAL] IPMI probe is no longer experimental.
· [BUG FIX] Fixed the sysUpTime workaround from 5.1.3b4 to only trigger when we detect a bad clock, instead of randomly; this would have caused rate type variables to randomly be off by a factor of 10. (73759)
June 7th, 2009· [BUG FIX] Fixed links in the web interface to SNMP Traffic devices that had originally been created with the Automatic probe.
· [BUG FIX] Changing the polling interval on a device will now flag a recount of monitored devices.
· [BUG FIX] Fixed crash that could occur while attempting to translate a previous error number into its textual equivalent on Windows when the error number was out of range.
· [BUG FIX] Remove "phantom" network oval entries relating to probe groups by removing the largely-unnecessary "guessed from address" interface.
· [BUG FIX] Encode results of request for devicename attribute for XML.
· [BUG FIX] Fixed a hang when opening the status window of a Proxim wireless device.
· [BUG FIX] Reset TAPI when Windows modem configuration is changed.
May 21st, 2009· [FEATURE] Add ability to edit member probe labels. (72468, 72564, others)
· [LATERAL] Add timestamp, recipient and ID to logging for modem paging and SMS. (57975)
· [BUG FIX] Setting the address on a probe group now correctly updates member probe labels to match the new IP address when appropriate. (73115)
· [BUG FIX] Probe groups created by selecting existing devices and grouping them to create a new group are now set up with the correct name resolution hint. (72649)
May 4th, 2009· [LATERAL] Added sFlow MIBs and probes.
· [LATERAL] Log defaults have changed for newly-created InterMapper Settings folders: debug logs are now kept seven days; outages log now rotates daily; SMS and Paging logs are now created automatically and kept for one day. (Existing InterMapper Settings folders remain unchanged.)
· [BUG FIX] Fixed a bug that resulted in occasional truncated datapoint exports to the database.
· [BUG FIX] Fixed a bug that caused the client to crash when loading InterMapper Database retention policies containing an apostrophe.
· [BUG FIX] The SNMP OID Comparison probe now correctly changes state if the OID appears or disappears.
· [BUG FIX] Fixed a number of problems relating to adding non-control-probe SNMP probes to a probe group. (72245)
April 22nd, 2009· [LATERAL] Built-in low-security SSL certificate now appears more clearly to have come from Dartware. (But users should still create and upload their own.) (72519)
· [BUG FIX] Creating a device as one probe type and then setting it to the Probe Group probe type no longer causes a spurious "unknown" device in the device list. (72461, 72561, 72733)
April 8th, 2009· [BUG FIX] Fixed two more potential crashes when ungrouping items from a probe group on a duplicated map.
· [BUG FIX] Fixed authentication problem when non-admin user attempts web access.
· [BUG FIX] Fixed a bug where count of licensed devices used could be off or incorrect for a while.
· [BUG FIX] Fixed a bug where the version of an unresponsive sflow exporter was displayed incorrectly in the status window.
March 28th, 2009· [LATERAL] Move the SNMP - High PPS and SNMP - High Traffic probes from Network Devices to SNMP.
· [LATERAL] NAGIOS perfdata format warnings now suppressed from event log at all times and from debug log except when detailed logging is turned on.
· [LATERAL] Ramp up the paranoia in some of the command-line probe code.
· [LATERAL] Incorporate the parameters from the "Basic Ping" probe into the "Ping/Echo" probe and remove the Basic Ping probe.
· [LATERAL] Added greyscale versions of default icons to the package.
· [BUG FIX] Fix a bug that prevented the Basic Ping probe from being recognized as supporting a Short-Term packet loss threshold.
· [BUG FIX] Fix a bug which caused InterMapper to continually attempt to register with the InterMapper Database when it should have been waiting for the user to respond to a duplicate UUID message.
March 19th, 2009· [FILE FORMAT] File format change.
· [LATERAL] Implemented more robust means of saving our place in an SNMP device's script in the case where the user is disallowing periodic reprobes.
· [LATERAL] Probe group's "governor" is now known as its "control probe".
· [LATERAL] Change the default edge style given to links created when a member probe added directly to a probe group is extracted from the probe group.
· [BUG FIX] Fixed bug where trying to create a chart from certain Ping probe variables would result in an error.
· [BUG FIX] Single-line comments were still being scanned for keys. Added IsCommentLine check prior to scanning. (71849)
· [BUG FIX] Setting the vantage point on a probe group now actually works instead of just seeming to work. (71850)
· [BUG FIX] Changed the Mac OS X installer package to use a post-10.2 format for improved compatibility with present and future Mac OS X. (71124)
· [BUG FIX] Remove unnecessary ASSERT that could cause the server to stop. (71896)
· [BUG FIX] Grouping and ungrouping a probe group now preserves user-attached edges.
· [BUG FIX] Fixed a bug where deleting a probe group which had a control probe set could leave what appeared to be an empty probe group on a map.
March 18th, 2009· [FEATURE] Server can import certificates and private keys bundled together in PKCS#12 format.
· [FEATURE] The "Basic Ping" probe (in the new Ping section of the Set Probe window) lets you specify the size and data pattern of the ICMP echo request.
· [LATERAL] Server can identify that it is running on Windows 7, distinguish Windows Server 2008 from Windows Server 2008 R2 and Windows Server 2003 from Windows Server 2003 R2.
· [BUG FIX] Fixed bug that resulted in long nonsense strings in Up messages in the event log.
· [BUG FIX] InterMapper now does a better job of tracking the DNS name entered by the user if the IP address to which it resolves has a different canonical name.
· [BUG FIX] Copy and paste of a probe group with a governor set now works correctly.
March 12th, 2009· [FILE FORMAT] File format change.
· [LATERAL] Collections are now known as "Probe Groups". Probe groups created using the old Collection probe will work for this version, but alpha testers should make new Probe Groups, as the old Collection probe will go away soon.
· [BUG FIX] Fixed bug where ADDRESS and PORT macros didn't expand correctly when displaying the NAGIOS command line in the display section of the NAGIOS template probe.
· [BUG FIX] Fixed bug where creating a collection which includes a device which has hand-drawn lines to another device could cause InterMapper to crash.
· [BUG FIX] Fixed bug which could prevent a probe group from being visible in map view after dragging a governor from one probe group to another.
· [BUG FIX] Fixed bug where a map could be flagged as corrupt if an SNMP or Probe Group probe referred to therein was no longer present in the probes folder.
March 11th, 2009· [BUG FIX] Restored pre-5.0.8 behavior for charts using a logarithmic scale.
March 3rd, 2009· [BUG FIX] Allow starting intermapperauthd when 'other execute' permission is not set, but we do have group execute permission. (71133)
· [BUG FIX] Prevented problems deleting old log files from keeping InterMapper from starting. (71168, 71282)
February 10th, 2009· [BUG FIX] Fixed a segmentation fault during startup on Solaris.
February 6th, 2009· No changes since 5.0.8b5.
February 3rd, 2009· [LATERAL] When we encounter a file created by a newer version of InterMapper, we note it as such and move it to the Maps (Disabled) folder, which is gentler than previous handling.
· [LATERAL] Host resources storage table sizes are now displayed in MB instead of KB.
· [BUG FIX] Fix display of many-terabyte storage entries in the host resources storage table.
· [BUG FIX] Fix code that generates the SSL certificate signing request so 0 or more fields of a particular type can optionally be included.
January 24th, 2009· [LATERAL] Added positive feedback when test notification succeeds. (70524)
· [BUG FIX] Implemented a "watchdog timer" for Unix/Mac OS X which will catch unusual hangs. Use the "watchdogtimer enable" server command to enable it.
· [BUG FIX] Fixed a bug in event log expiration which prevented old .changes and .lossless logs from being deleted properly.
· [BUG FIX] Load the wireless probe bundle as long as a wireless license is present, even if it's expired, so that devices relying on it won't be set to the non-polling probe. (70608)
· [BUG FIX] Improved performance while exporting to InterMapper Database (70454, 70372, 69898, 69476, 66943, 66603, 66555, others)
January 22nd, 2009· [BUG FIX] Fixed an instance where bad NAGIOS PERFDATA could cause an assertion failure in InterMapper. (70373)
· [BUG FIX] Fixed possible crash when parsing IfModified header. (70361)
· [BUG FIX] InterMapper no longer performs a full reprobe of a shared device at startup if the user has disabled automatic reprobe for the router. (70349)
· [BUG FIX] Fix a problem making an outgoing TCPv4 connection when running on a FreeBSD machine with IPv6 disabled. (70253)
January 1st, 2009· [BUG FIX] Corrected a case where non-UTF-8 data could corrupt the logs sent to the database.
December 22nd, 2008· [LATERAL] Added ${DEVICENAME} to the list of macros that can be passed to a command-line probe.
· [LATERAL] Suppressed printing of SNMPv3 passwords in logs when detailed logging is turned on.
December 15th, 2008· [LATERAL] Added an option to clear the recent outages history from the device status window. We no longer copy the recent outages history when copying and pasting a device. (69587)
· [BUG FIX] Removed an unintentional limit of 10 active sound notifiers. (69667)
December 3rd, 2008· [BUG FIX] Prevent backslashs in certain parts of Nagios PERFDATA from mangling status window output.
· [BUG FIX] Draw charts correctly where the upper and lower bounds are inverted.
November 25th, 2008· [BUG FIX] Fixed a crash when a custom probe attempted to use too many parenthetical captures in a regular expression. (69460)
· [BUG FIX] Fix assertion failure when using new Juniper Netscreen VPN probe. (69665)
· [BUG FIX] Fix incorrect behavior in the CVS probe when the password encrypts to a hash containing a double-quote. (69698)
November 20th, 2008· [LATERAL] Further support for monitoring the performance of the polling engine, for testing, via a TCP probe.
· [BUG FIX] Fix the OID used for the remote IP address in the Netscreen VPN probe. (69145)
November 19th, 2008· [LATERAL] Added support for monitoring the performance of the polling engine, for testing, via a TCP probe.
· [BUG FIX] Device labels in the web interface use the same colors as device labels in InterMapper RemoteAccess. (68598)
· [BUG FIX] Further fixes to trouble with the ipAddr table with some devices where the indices in certain tables may not be in strictly ascending order, even when ALLOW_LOOPS is used. (62935)
· [BUG FIX] Avoid incorrect ifDescr of "[[[Not in IfTable]]]" when ALLOW_LOOPS is enabled. (62935)
· [BUG FIX] Fixed "Could not find user nnn" error in the InterMapper Flows extension installer on Linux. (69520)
· [BUG FIX] Fixed error while setting file ownership in the InterMapper Flows extension installer on OSX Tiger Server. (69441)
· [BUG FIX] Moved DNS resolution for SSL connections to DataCenter into its own thread; this dramatically improves performance in the main thread.
November 12th, 2008· [BUG FIX] Fix situation where corrupted output could appear in the host resources probe status window if InterMapper couldn't set the "locale" to native for proper formatting. (69372)
· [BUG FIX] Be even more forgiving of domain names which begin with digits. (69374)
· [BUG FIX] IM has trouble with the ipAddr table with some devices where the indices in certain tables may not be in strictly ascending order, even when ALLOW_LOOPS is used. This should fix that. (62935)
November 4th, 2008· [BUG FIX] Fix a bug in map list notifier view and global device list handling which could cause incomplete XML to be sent to the client. (68990 et al.)
October 30th, 2008· [LATERAL] Crash reports caused by a segmentation violation have a score of 150. (69143)
· [BUG FIX] Fix a bug that could cause crashes or assert failures when telnet or web clients are using the authentication server. (68341, 69169)
· [BUG FIX] Fixed an issue where editing data retention policies on the DataCenter server would not update the InterMapper Server.
· [BUG FIX] Fix a crash on startup when loading maps with certain TCP devices. (69231)
October 27th, 2008· [LATERAL] We now obscure the password when SMTP errors are logged to the event log. (69101)
· [LATERAL] As a test, temporarily increase the timeout when waiting for paging terminal to answer during alphanumeric paging. (69103)
· [LATERAL] IMFlows serial numbers can be submitted via the InterMapper Server Settings -> Registration panel.
· [LATERAL] Added support for a "users" command in the Telnet server. This command lists all users in the system, and lets you remove users, if desired.
· [LATERAL] Added support for the ALLOW-LOOPS and IFINDEX-BUG probe flags in custom SNMP probes.
· [BUG FIX] Fixed an issue which could cause incorrect stopbit or parity settings in modem page connections.
· [BUG FIX] Fixed some display corruption in the device status window when there was a backslash in the device's sysLocation or sysContact SNMP data. (69045)
· [BUG FIX] Fixed an issue with BlitzWatch probes that arises if the InterMapper Server is running on an Intel processor. (69069)
· [BUG FIX] Escape for XML certificate information sent to client. (69087)
· [BUG FIX] Improve reliability of IPMI code when probing Intel XServe. Added a "dialect" parameter to the IPMI probe to support toggling between XServe and "Other" modes.
· [BUG FIX] Defend against unnecessary CPU-usage caused by datasets that includes time series out of order. (68894)
October 21st, 2008· [BUG FIX] Fixed a crash that could occur occasionally on shutdown or when deleting a device. (67761)
· [BUG FIX] Fixed a crash caused by deleting a TCP device that was waiting in a queue to be polled. (68868)
October 17th, 2008· [BUG FIX] Adjusted the position of chart titles in the web interface so they no longer overlap the axis markers.
October 9th, 2008· [BUG FIX] Event log files and chart data files can now "reactively" buffer their data, if there is a temporary error when writing to disk. This change should improve interoperability with backup programs on Windows.
· [BUG FIX] Fix the incorrect error response in the DNS-PTR Query probe.
· [BUG FIX] Do not close the connection to IM Flows when we receive a server restart message; this seems to cause problems on Windows.
· [BUG FIX] Improve the event log message for SNMPv3 traps that are not associated with a device on a map.
· [BUG FIX] The IPMI protocol does not deal well with session timeouts. When a session times out, the IPMI device will stop responding. We need to be prepared for this by forcing the session closed and re-opening it.
· [BUG FIX] Fix an issue which caused Intel XServe's probed via IPMI to return the error message "IPMI: Failed to open session. IPMI_RAKPMessage3 returned error 15".
· [BUG FIX] When choosing an IP address for the "self-publish" address, prefer the global one with the non-zero MAC address.
· [BUG FIX] Fix bug in web server where devices cannot be located by their IPv6 address because it contains colons.
· [BUG FIX] Fix a check for message length to prevent debug log messages for IM Flows when there are zero exporters.
· [BUG FIX] Fixed a crash when attempting to delete a map that had been disabled due to errors.
September 29th, 2008· No changes since 5.0.5 Beta 3.
September 28th, 2008· [BUG FIX] Fixed a crash when two snmpwalks with different SNMP versions were running at the same time on the same device.
· [BUG FIX] Customized interface RX speed was not saved correctly in map file.
September 17th, 2008· [BUG FIX] When a MIB is re-imported, we now correctly use the new definitions.
September 15th, 2008· [LATERAL] More debug logging for certain types of DNS message errors.
· [BUG FIX] Better table alignment on web interface device list with non-ASCII characters or high packet/byte counts.
September 2nd, 2008· [BUG FIX] Implemented better fallback than crashing for Windows hosts that don't support IPv6 themselves, but get an IPv6 address from a device.
August 29th, 2008· [LATERAL] Properly log out of memory exceptions to the debug log.
· [LATERAL] Improve debug logging of RADIUS responses packet id's already seen.
· [LATERAL] Instrument the code that opens the global device list with debug logging.
· [BUG FIX] Make probe loader more robust in the face of certain types of malformed probes.
August 27th, 2008· [BUG FIX] Fixed a crash during autodiscovery if the 'named' filter was selected but no DNS servers were configured.
· [BUG FIX] Removed extraneous unopenable untitled charts from the chart list.
August 18th, 2008· Include current value of items which exceed thresholds in Host Resources probe.
August 8th, 2008· No changes since 5.0.3b5.
August 7th, 2008· [BUG FIX] Log setting for Web, Telnet, Remote server are once again remembered correctly. (62440, 66602)
· [BUG FIX] Fixed problem where exceptions at certain times could cause NT services probe to a particular IP address to time-out continually until IM server is restarted.
· [LATERAL] Outages log now uses 24-hour time rather than AM/PM notation to make it easier for log processors to process. (66576)
June 24th, 2008· [LATERAL] Display the crash score in our bug report email subject line using 3 digits, to simplify sorting.
· [BUG FIX] Prevent server from occasional crashing during writing the content of ifTable from RFC 1573. (65074, 65284)
· [BUG FIX] Work-around an issue with IPV6_V6ONLY on FreeBSD 5 and 6 which prevents us from sending UDPv4 packets. (65503)
June 16th, 2008· [FEATURE] It is now possible to disable IPv6 support within InterMapper server using a command-line argument (--no-ipv6) or a configuration file option (IPv6 false).
· [LATERAL] On Unix-based systems, InterMapper server now reloads server extensions upon receipt of a SIGHUP. Added the Extension.sh script on Mac OS X to assist in the installation of server extensions.
· [BUG FIX] Fixed a memory corruption which could happen during removal of a user. (65798)
· [BUG FIX] Fixed situation where IMRA might not log in or ask for credentials if IM Server was configured to use IMAuth, but IMAuth was not active. (65803)
· [BUG FIX] The --listen command-line argument is now honored in InterMapper server. It only supports IPv4 addresses and implicitly disables IPv6 support.
· [BUG FIX] Changed the advanced installation procedure on Mac OS X to be compatible with Leopard; the optional INTERMAPPER_USER setting is now read from the intermapperd.conf file at install time.
· [BUG FIX] Our strftime function (for custom SNMP probes) code will now expand %D and %T before passing them to the Windows strftime C library function, as these format specifiers were not implemented in Windows and have started to cause ASSERT failures when passed directly the Windows C runtime libraries from Microsoft.(65757)
June 9th, 2008· [LATERAL] We detect and do not allow unordered timestamps in the lossless log.
· [BUG FIX] Maps with a background image are exported correctly as an image. The background image used to either be invisible or to cover map's devices and/or links.
May 29th, 2008· No changes since 5.0.1b1.
May 28th, 2008· [BUG FIX] Xserve RAID probe did not change status when a RAID was 'degraded'.
· [BUG FIX] Corrected the list of charts shown in the web interface; some internal __auto_XXXXX charts were erroneously being shown.
· [BUG FIX] Manually load GetAdaptersAddresses from IPHLPAPI.DLL so service now runs on Windows Server 2000 again.
· [BUG FIX] Map names in URLs are once again case-insensitive.
· [BUG FIX] Map status device refering to a map on another server updates correctly its full path name.
· [BUG FIX] Fix bug which caused problems for SMTP probes and the SMTP notifier which need access to the local address of their connection.
· [BUG FIX] The Mac OS X installer will no longer install on Mac OS X 10.3.9; InterMapper requires Mac OS X 10.4 or later.
May 22nd, 2008· [BUG FIX] Fixed a bug in command-line installation on Mac OS X. The installation was failing because the installer did not recognize when the 'intermapper' user existed.
March 18th, 2008· No changes since 4.6.9b1.
March 14th, 2008· [BUG FIX] Fix ASSERTion failure probably due to import of users and groups info with an empty/NULL user.
· [BUG FIX] Fix a double-free in the auth server support code.
· [BUG FIX] Temporary fix to ASSERTion failure related to shared polling.
· [BUG FIX] Fix ridiculously high round-trip times.
· [BUG FIX] Fix a possible initialization problem that may affect host resource status windows.
· [BUG FIX] Fix an ASSERT introduced in 4.6.8 in polling MIB-II status only request.
February 12th, 2008· InterMapper can now use an LDAP, Active Directory, Open Directory, or Radius server to authenticate users.
· Updated probes (Xserve RAID; Cisco IP SLA); VLAN information in Interfaces window; shared polling feature; autolayout of devices
January 10th, 2008· InterMapper can now use an LDAP, Active Directory, Open Directory, or Radius server to authenticate users.
· Updated probes (Xserve RAID; Cisco IP SLA); VLAN information in Interfaces window; shared polling feature; autolayout of devices
October 23rd, 2007· InterMapper can now use an LDAP, Active Directory, Open Directory, or Radius server to authenticate users.
· Updated probes (Xserve RAID; Cisco IP SLA); VLAN information in Interfaces window; shared polling feature; autolayout of devices
Find us on Google+
