What's new in DataExplorer 3.2.8
Nov 2, 2016
- remove the restriction re-naming compressed OSD-Files
- exchange the default value of data file path to user.home instead of using root which causing permission errors
- MC3000:
- fix setting slot programs with capabilities of FW >= 1.12
- add device XML with TYPE_CONFIG as MC3000-Set to enable single file for all 4 slots, all batteries are a set:
- fix handling with different temperature units and unit switch
- extend help info to describe difference between MC3000 and MC3000-Set
- GPS-Logger2:
- correct maximal number of measurements using file I/O data block -52, require manual exchange by deleting GPS-Logger2.xml
- HoTTAdapterX:
- refine log content analyze to distinguish between HoTT V2 and the normal HoTT V4 content
- HoTTAdapter:
- enable reading 'GRAUPNER SD LOG8' which contains normal HoTT V4 sensor data
- Futaba-Telemetry:
- correct error in getGPS2KMZMeasurementOrdinal used to set up the Google Earth configuration dialog
- GigaLogger:
- correct error in getGPS2KMZMeasurementOrdinal used to set up the Google Earth configuration dialog
- IISI-Cockpit V2:
- correct error in getGPS2KMZMeasurementOrdinal used to set up the Google Earth configuration dialog
- JetiAdapter:
- correct error in getGPS2KMZMeasurementOrdinal used to set up the Google Earth configuration dialog
- NMEAAdapter:
- correct error in getGPS2KMZMeasurementOrdinal used to set up the Google Earth configuration dialog
- OpenTxTelemetry:
- correct error in getGPS2KMZMeasurementOrdinal used to set up the Google Earth configuration dialog
- Weatronic-Telemetry:
- correct error in getGPS2KMZMeasurementOrdinal used to set up the Google Earth configuration dialog
New in DataExplorer 3.2.4 (Dec 23, 2015)
- add support for native USB communication
- add support for SkyRC MC3000 single cell charger
- JetiAdapter - increase number of initial supported measurements to 50
- iCharger - implemented checksum checking for serial communication
- JetiAdapter - add Rx->Tx time delta statistics (not differentiating over sensors)
- JetiAdapter - fix intermittent find best fit of time step which end up in less display points
- JetiAdapter - fix inconsistent detection of Speed record which leads to unusable color configuration while Google Earth KMZ export.
- HoTTAdapterX - HoTT V2 enable data visualization for external voltage and temperature
- implement feature request to edit single cell in table
- fix problem while measuring due to missing scale end value synchronization when scale synchronized measurement visibility toggled
- fix problem while GPS coordinates are available, but speed record ordinal can not be identified
- fix CSV export Time unit to [hh:mm:ss.SSS]
- fix font size dialog while using high resolution
- swt update to version 4.5
New in DataExplorer 3.2.3 (Nov 21, 2015)
- HoTTViewer - add support to open and display saved OSD-files with Graupner/SJ HoTT Viewer App
- GigaLogger - add support
- Herkules III Telemetry - add support
- HoTTAdapterX - enable live logging (needs device XML to be replaced)
- fix - clean data model while importing CSV where record set number follow channel number
- HoTTAdapter - adapt filter GPS data parsing for import bin log data
- fix - scale number calculation error while display area is greater than 1500 pixels.
New in DataExplorer 3.2.2 (Jul 20, 2015)
- fix exception while record clone operation (cut)
- fix minor errors in automated test
- LiPoWatch - small correction of the serial communication to keep LEDs off
- HoTTAdapter2* - fix error while opening OSD file with channels from earlier release
New in DataExplorer 3.2.1 (Jun 22, 2015)
- add current/voltage smoothing algorithm to be used for very short drop peaks
- enhance device interface for charger to adapt curve smoothing according device needs
- HoTTAdapter* - refine sensor detection - to increase chance not in text-modus segment
- HoTTAdapter* - correct channel time unit to µsec
- HoTTAdapter* - adapt ESC Capacity filter
- HoTTAdapter2* - fix problem missing receiver data not using Channel configuration
- GraupnerUDP* - some adaptations to device internal behavior
- Akkumatik - add support
- HoTTAdapterX - add support with receiver and ESC data, rounds statistics (X-N8, X-4S)
New in DataExplorer 3.2.0 (Mar 2, 2015)
- fix initial synchronization of measurements
- fix Junsi iCharger 206, 208, 306, 3010 constant time step to 2 seconds
- fix problem while copy graphics into clip board several time in sequence
- fix JLog2 context help page selection
New in DataExplorer 3.1.9 (Dec 30, 2014)
- enable absolute time for graphics time line
- enable to set the font size of measurement values on digital display
- several processing optimizations
- fix caching algorithm to enable scale text color updated by color change
New in DataExplorer 3.1.8 (Oct 21, 2014)
- FIXES:
- fix Kosmik rounding issue
- fix HoTTAdapter* text mode initialization
- fix JetiAdapter missed parsing data from sensor without unit
- fix JetiAdapter GPS-Altitude and GPS-Speed detection
- fix time formating in statistics window
- fix GPS-Logger2 speed parsing from SMGPS instead VTG sentence
- JetiAdapter - display events as a curve, repeating events add up the counter
New in DataExplorer 3.1.7 (Sep 18, 2014)
- fix GPXAdapter altitude parsing
- fix IISI Cockpit V2 to tolerate empty values and display a warning message
- fix IISI Cockpit V2 GPS value handling
- fix Futaba-Telemetry number of maximum measurements
- fix HoTTAdapter EAM RXSQ curve parsing correct buffer
- fix Kosmik, missing gear ratio related configuration update
- enable HoTTAdapter* text modus filter configuration
- add Polaron charger support
- add Ultra Quick 70 charger support
- add Ultramat Ac/Dc EQ charger support
- add eStation BC6 80W (BC6dx/Pichler P60 80W) support
- documentation update
New in DataExplorer 3.1.6 (Jul 25, 2014)
- Update to latest SWT drop due to problems reported for Linux
- enable reduced data table by selected records for all devices, enablement via context menu
- add 230400 Baud entry in device properties XSD to enable workaround for Junsi charger at UNIX operating systems
- enable always to left cut and right cut permanent
- display selected measurement values in comment area while measuring
- enable to set record set start time stamp manually
- fix display for GPS coordinates in several tabs
- fix time display in statistics
- update MdlViewer to 0.8
- HoTTAdapter* - detect switching into text modus where no readable telemetry values are available
- HoTTAdapter* - adapt binary log reader to protocol introduced last year to reduce telemetry value errors
- iCharger*B - fix power calculation
- GPXAdapter - fix to tolerate GPX files without extension data
- Kosmik - fix import problem with modified file name
- add iCharger308Duo support to import data from device (actually no support for live data)
- add IISI Cockpit V2 support
- add FutabaTelemetry support
- documentation update
New in DataExplorer 3.1.4 (Feb 3, 2014)
- update build to make sure compiled classes target 1.6
- update height of device properties editor to enable proper display of scroll bar in channel- configuration tabulator
- enable record color usage configuration for scale, scale numbers and record name
- enable configuration of outlet- configuration name usage in curve compare
- Junsi iCharger - fix data capture capability
- FlightRecorder - fix using name and unit from setup
- HoTTAdapter - fix file transfer count down/up signature
- HoTTAdapter - fix file transfer initial PC folder update
- HoTTAdapter - fix fuel to ml, was fuel level in % (requires manual replacement of device XML if used)
- HoTTAdapter - fix Rx->Tx PLoss first value by setting to 0
- HoTTAdapter2 - add evaluation of EAM RPM (as GAM RPM value)
- UltraDuoPlus - correct several adjustment parameters in viewpoint of range
- 4D-Akkumonitor - correct time calculation, adapt device XML, adapt template XML
- documentation update
New in DataExplorer 3.1.3 (Dec 16, 2013)
- fix bug in clone time steps while time step is constant
- add capability to globally configure time format for table, measurement, start time while zooming/oscilloscope
- add capability to smooth voltage curves to be used if pulsed or similar (result depends on frequency and is actual not adjustable)
- add capability to capture charge cycles in a single record set
- add capability to suppress data collection during pause, balancing if not already done by device
- Scope-Mode - add more entries to enable more flexibility about the view range
- Graphics - enable measurement names in curve color at scale
- Timeline - tick mark correction
- Junsi CellLog 8S - add support
- JetiAdapter - adapt data parser to tolerate string messages like alarm and signal loss (actual written to log)
- LiPoWatch - correct calculation of total voltage
- HoTTAdapter* - add Rx->Tx PLoss statistics
- HottAdapter2 - fix import skipping adding some packages for channel
- UltraDuoPlus* - fix sorting of battery history output
New in DataExplorer 3.1.2 (Aug 26, 2013)
- all devices mainly importing data - write filename after import to record set description
- HoTTAdapter* - fix sensor mash up due to newly introduced sensor scan
- HoTTAdapter* - fix balance calculation while import from bin
- HoTTAdapter* - fix switch off filter capability for current GAM/EAM
- HoTTAdapter* - adapt filter current, allow 255 A max
- HoTTAdapter* - adapt filter
- fix IGC export file error
- JetiAdapter - add import progress display
- add Ultra Duo Plus 80 (Graupner) dual channel 1000W charger
- documentation update
New in DataExplorer 3.1.1 (Jul 25, 2013)
- Problem while target reference ordinal of cell voltage is not returned from device
- HoTTAdapter* - adapt GPS filter
- HoTTAdapter* - adapt ESC filter
- HoTTAdapter* - updates for HoTTViewer tab
- HoTTAdapter* - add SD Log version 1 which appears after firmware update MX20
- add Junsi iCharger3010B
- Enable extended special record data types
- Enable device specific data parser
- Add 4D-Akkumonitor
- Update SWT to 4.2.2 final stable release
- Fix import/export of generic CSV data
- Fix statistics value display if trigger configured but no occurrence
New in DataExplorer 3.1.0 (May 22, 2013)
- add some logs to check UI initialization and check min window size to prevent initialization exceptions
- UniLog2 - fix problem interpreting UTC-offset which does not exist
- UniLog2 - fix problem day skip while reading big data files > 24 hours
- HoTTAdapter2 - correct EAM current
- HoTTAdapter* - update filter settings
- HoTTAdapter* - integrate HoTTMdlViewer
New in DataExplorer 3.0.9 (May 7, 2013)
- AV4ms_FV_762 - fix problem importing data
- HoTTAdapter*, DataVario*, LinkVario* - fix/adapt UI in combination with new SWT release
- HoTTAdapter* - calculate CRC for mx-21mx16 converter instead of static update
- HoTTAdapter* - adapt data reader *.bin and live data of ESC according firmware update
- HoTTAdapter* - enable MDL Viewer tabulator (requires extra Java archive)
- fix [bug #38250] Feature: Use keyboard for zooming
- fix [bug #38251] Feature: Improved update check
- fix bug - in startup sometimes an error "null" (NullPointerException) occurs
- graphics templates - remove defined end points from graphics templates while potential value end points may outside this range
- UniLog2 - adapt to latest firmware 1.09
- GPS-Logger - adapt to latest firmware 1.10
New in DataExplorer 3.0.8 (Apr 4, 2013)
- add Renschler Picolario2 support
- add Kontronik Kosmik support
- update SWT to version 4.2.1
- add IGCAdapter support for short naming
- fix bug #38246 - Multiple actions when right-clicking into graphic
- fix RFE #38245 - Allow editing of commentary in table "File comment"
- fix bug #38247 - Progress bar not reset after loading files
- fix RFE #38248 - Feature: Copy function for data table
- HoTTAdapter* - change/correct Rx->Tx-PLoss measurement name
- HoTTAdapter* - change algorithm sending commands during live data gathering
- HoTTAdapter* - update Rx->Tx-PLoss calculation, integrate package loss over 1 second period
- HoTTAdapter* - update to latest firmware (ESC)
- HoTTAdapter* - fix bug in mx-12 mx-16 MDL converter
- Jlog2 - update support firmware 4.0.0
- documentation update
New in DataExplorer 3.0.7 (Feb 13, 2013)
- HoTTAdapter(2) - live data, display detected sensors, optimize performance
- add IGCAdapter - enable import of IGC log files to verify before upload
- add GPXAdapter - enable import of GPX files, analyze geo coordinates as well as other data
- fix bug #37976: installer.nsi is missing, not required, changed build target
- fix bug #37991: Prefix is not recognized, changed target directories to prefix if in use
- fix bug in HoTTAdapter saving modified filter data
- fix bug HoTTAdapter2 reading channel data 9-12
- fix bug HoTTAdapter2 displaying cell voltage values
- fix bug HoTTAdapter* reading HF data
- fix bug HoTTAdapter* converting mx-20 to mc-20 and vice versa
- fix bug HoTTAdapter* converting mc-32 to m*-20
- fix bugs in JetiAdapter - exporting KMZ/KML/IGC
- fix bug in GPS color and velocity configuration dialog
- fix DevicePropertiesEditor - statistics type and property types doesn't persist after change
- add HoTTAdapter* mc-16 converter capabilities
- add HoTTAdapter* TX-Rx-VPack curve
- update UniLog2 configuration to support HoTT sensor type selection
- update device XSD to simplify timeout configuration
- documentation update
New in DataExplorer 3.06 (Dec 15, 2012)
- add JetiAdapter to analyze flight record data from Jeti transmitters
- add AV4ms_FV_762 charger for AA and AAA size cells
- change time line behavior, start showing day > 72 hours
- enable auto-save of a temporary file(s) each 5 minutes
- enable gestures for zooming and panning
- CSV2SerialAdapter - enable file import via menu in parallel to configured serial input
- integrate MAC OS standard menu bar actions
- fix Google Earth export in respect of line gaps due to velocity change
- fix HoTTAdapter data import in respect of rest after telemetry data
- package loss
- build Windows NSIS installer
- build MAC OS disk images for install
- documentation update
New in DataExplorer 3.05 (Oct 23, 2012)
- HoTTAdapter(2) - correct device XMLs to support current related statistics (number motor climbs vs gained height)
- HoTTAdapter(2) - enable filter for current drops to zero above 10A (this hurts statistics calculation regarding trigger usage)
- DevicePropertiesEditor - fix problem killing application due to SWT out of handles
- HoTTAdapter(2) - enable/refine mx20, mc20 mc32 model configuration files conversion
- HoTTAdapter(2) - fix time difference in table view to Firmware_Upgrade_grStudio
- HoTTAdapter(2) - fix live data gathering receiver only
- HoTTAdapter- fix reading channel data from bin while multiple sensors attached
- UniLog - fix capacity calculation
- GPS-Logger - fix UniLog2 sentence detection, UniLog may lazy start relative to GPS-Logger
- Implement support for zip compression of OSD files
- fixed [bug #37464] Title bar of "Device Properties Editor" shows "&"
- fixed [bug #37302] File comment is reset when I move the mouse
- fixed [bug #37460] DataExplorer triggers Microsoft Security Essentials
- fixed [bug #37465] Keep selection in curves selector after pressing space
- fixed [bug #37487] Strange bug when editing in the file comment tab, if deleted within the line
- fixed [bug #37463] Close all dialogs with ESC key
- fixed [bug #37462] Add shortcuts like e.g. Ctrl+S to save
- fixed [bug #37568] Object characteristics doesnÂŽt remember last used directory
- fixed [bug #37466] Cursor handling in Table view
- all devices importing data - refine import path handling, enable configuration using preferences
- refine zoom handling, support left to right zooming, right to left reset and mouse wheel support
- enable migration of device usage, port, import path, channel/configuration usage while updating device configuration XMLs
- enable switch off all curves at once, Ctrl+L will apply default graphics template again
- documentation update
New in DataExplorer 3.04 (Sep 22, 2012)
- fix scale synchronization problem while change zoom
- fix problem zoomed graphics versus table view with lazy update
- fix record length created by regression calculation
- fix problem synchronizing record scales for records with different measurement factors
- JLog2 - correct measurement names, and units
- Jlog2 - fix configuration
- Jlog2 - fix time step error
- HoTTAdapter(2) - enable GPS data filter access in device dialog
- HoTTAdapter - add channel configuration to display channel data
- update Linux cp210x kernel module for kernel 3.2.0.24
- documentation update
New in DataExplorer 3.03 (Aug 1, 2012)
- fix scale synchronization problem while change zoom
- fix problem zoomed graphics versus table view with lazy update
- fix record length created by regression calculation
- fix problem synchronizing record scales for records with different measurement factors
- JLog2 - correct measurement names, and units
- Jlog2 - fix configuration
- Jlog2 - fix time step error
- HoTTAdapter(2) - enable GPS data filter access in device dialog
- HoTTAdapter - add channel configuration to display channel data
- update Linux cp210x kernel module for kernel 3.2.0.24
- documentation update
New in DataExplorer 3.02 (Jul 7, 2012)
- fix performance problem while in zoom mode and update statistics
- data (big datasets)
- UniLog2 - remove not supported 50Hz logging rate adjustment
- HoTTAdapter(2) - enable serial file transfer
- JLog2 - refine default import path handling
- DeviceProperties_V17 -> DeviceProperties_V18 due to
- HoTTAdapter(2) device properties changes
- HoTTAdapter - toggle import of channel deflection via device
- dialog (performance hit, blow up file)
- HoTTAdapter(2) - correct signal strength calculation
- HottAdapter(2) - add support for serial file transfer
- HottAdapter(2) - add support for model data backup (does not
- contain binding information!)
- HottAdapter(2) - add support for simple model data conversion
- HoTTAdapter2 - add channel-configuration displaying all available
- data including channels
- HoTTAdapter(2) - enable adoption for evaluation of incoming
- Latitude and Longitude by given unit (MicroCopter, degree vs degree minutes)
- GPS-Logger - use speed data from RMC sentence which contains
- height difference adapted speed values
- documentation update
New in DataExplorer 3.01 (May 24, 2012)
- fix scale synchronization problem while change zoom
- fix problem zoomed graphics versus table view with lazy update
- fix record length created by regression calculation
- fix problem synchronizing record scales for records with different measurement factors
- JLog2 - correct measurement names, and units
- Jlog2 - fix configuration
- JLog2 - fix time step error
- HoTTAdapter(2) - enable GPS data filter access in device dialog
- HoTTAdapter - add channel configuration to display channel data
- update Linux cp210x kernel module for kernel 3.2.0.24
- documentation update
New in DataExplorer 3.00 (Apr 26, 2012)
- reduce scan depth while searching files and directories, OutOfMemory with recursive created directories by Wine
- update CSV data parser
- UniLog2 - fix error restart live gathering not possible if stopped while dialog is closed
- HottAdapter2 - fix GPS data detection to enable Google Earth visualization
- HottAdapter(2) - fix Receiver detection and add data error correction
- HottAdapter(2) - add filter to filter Latitude/Longitude spikes, adjustable through device configuration filter_factor
- UniLog2 - live data gathering keep already gathered data in case of an error
- UniLog2 - live data gathering enable loop to reset live gathering
- Multiplex FlightRecorder support
- SM Modellbau JLog2 support
- fix error cut curves with constant time step
- fix error open help dialog Linux
- update device properties schema to enable extended configuration
- update device properties editor to reflect schema updates
- UltraDuoPlus 50 - fix error to enable curve recording
- UltraDuoPlus 50 - enable dialog to manage battery memory and retrieve battery history
- SWT update to 7.2.2 final
- update Linux cp210x kernel module for kernel 3.0.0.17
- update documentation