TSE R47 1.0
Audio plug-in that emulates the famous 'rodent' pedal
TSE R47 is tuned a against clips of the real unit and modeled against a schematic of the unit.
Furthermore, note that TSE R47 does not perfectly copy the original hardware sounds, since it's only a digital emulation.
- Quality switch: 'LO' and 'HI' setting. HI setting removes additional aliasing.
- Stereo switch: Process two guitars at once. They must be hard-panned left/right to avoid bleed between channels
- Input Level: Control the incoming (guitar) signal. Value of 1.0 = +0dB and 2.0 = +6dB
- Drive: Control the amount of dirt
- Filter: A lowpass filter, max setting is full lowpass.